Easy product returns
You can return the product without providing a reason within 14 days.
Material weight: 0,25 kg
Material diameter: 1,75 mm
Polyether Ether Ketone (PEEK) is one of the most desired high-performance polymers. Exceptional mechanical and thermal properties and high chemical resistance make PEEK to be considered as a substitution for aluminium. It's one of the strongest materials that can be used on FFF 3D printers. The filament perfectly combines good sliding properties, mechanical strength and resistance to high temperatures. Perfect for lightweight and strong applications. It can be used together with the 3DGence ESM-10 the first soluble support for high-performance polymers on 3DGence INDUSTRY F340.
Typical applications include the automotive, marine, nuclear, oil-well, electronics, medical, and aerospace industries.
- Elements of machines and devices
- Medical applications
- Elements of aircraft interiors
PEEK should be warmed up each time before using by placing it at 75°C for about 24 hours. You can use the printer working chamber or a dedicated heat-drying dryer for this purpose. Even a small amount of moisture in the material will adversely affect the mechanical parameters and the quality of the model – air bubbles will appear on the walls.
It should be taken into account in the design process that the minimum cross-section in the model should not be less than 25 mm2. The minimum thickness of the printed wall without losing its strength is 2 mm. It is possible to print
thinner walls, but their mechanical strength will be significantly reduced.
- Product code: F01302040200.25
- Works with:INDUSTRY F420, INDUSTRY F340
- Module:HT MAX, M500
- Weight:0.5 kg
- Diameter:1.75 mm
- Tensile Strength:105 MPa
- Young’s Modulus:4,1 GPa
- Bending module:3,9 GPa
- Charpy:14 kJ/m2
- Ekstruzja:360 - 400°C
- Bed Temperature:120°C
- 3DGence Certified Material Base:Yes